I know you’ve probably Googled “How to Strip Paint” a number of times if you are like me, and tried a gazillion ways to remove paint from furniture. This quick and easy tip is bound to have you trying this out next time. Here’s How to Strip Paint the quick and easy way:
Today I’d like to introduce you to one of my loyal Facebook followers. Elisabeth is an avid DIYer and often pops up on the same DIY Facebook groups I’m a part of with lots of great tips and advice.
When I saw this tip along with Elisabeth’s pictures of her first time trying it, I knew there’d be more of you out there who would benefit from this very easy DIY trick!
Pillow Talk CLEARANCE SALE across a large variety of products like cover sets, throws, cushions, lamps, accessories, mugs, linen and more.
Guest Post – by Elisabeth Crowe
CONTEMPLATING BECOMING A STRIPPER? … A paint stripper, of course!
I know some paints don’t require you to strip the existing layers, but here’s a handy hint – just in case!
If you’re struggling to remove decades-old layers of paint or varnish, and the fear of spending hours, days maybe, doing a work out with your abrasives, is really putting you off….. Fear not! This little trick may be just the thing to put a smile on your face!
I’ve been stripping two old doors from my childhood home. The house was built in the 1920s, so there was about 85 years of paint and varnish on them. It’s been hard slog, I must say, until I recalled this hint. I’d glimpsed it once in a photo but have never heard anyone talk about it, or recommend it, but I thought I’d give it a go.
This is easy to do, doesn’t require fancy equipment, and gives excellent results!!
Let’s take a look at the original condition of the doors, complete with wallpaper within the panels:
Here’s the first door I worked on, BEFORE I remembered the easy stripping method I’m about to show you (below). And this is after the FIFTH coat of stripper!! (Took me D-A-Y-S!!)
Here’s the trick:
- Gloves and apron on! Add a mask if you’re using a stripper that smells nasty.
- Take your preferred paint stripper and slather it onto your piece of furniture. I used one of the ordinary sort, (may have been Diggers brand??), and this worked brilliantly! You could try the more environmentally friendly strippers (eg. Citristrip), but I haven’t tested this method using these yet. Be generous and put a good thick layer onto your item.
- Get your good old plastic wrap – yes lunch wrap/Glad Wrap or the equivalent – and lay this down over the stripper, extending a small way past the ends of the piece.
- Lightly press this down all over the paint stripper, trying to remove as much air as possible. Continue to apply the plastic, slightly overlapping at the edges.
- Then … step away from the furniture! Yes, just walk away (maybe go for a drive and collect freebies off council strips – just a thought), and stay away for 1.5 to 2 hours.
Ready for the Magic?
- Return to your project and slowly peel back the first piece of plastic. I found it’s easier to peel back sections, and scrape it off as I went, rather than peel it all off and have to hurry. A lot of the layers of paint will simply peel off with the plastic.
- What’s left can be easily removed with a gentle scraping.
- I then wiped any residue off with scrunched up newspaper, until all the stripper was gone.
- Here I’ve peeled back the wrap. You can see a lot of the paint has lifted off with the wrap. Then I’ve scraped the paint back – right back to the original 1920s varnish. It really wasn’t at all difficult to remove, and only took 20 minutes, including the detailed work on the moulding.
- If needed, repeat the process.
- My door took two goes, and it was so easy to remove! Quite pleasant actually – I never thought I’d say that!
- I didn’t damage any of the moulding on the door doing it this way. The previous door that I had stripped without using the plastic wrap – only stripper and scraper – was pretty damaged.
- It also took far less coats of stripper than the previous door. After numerous coats and scraping on the first door, the paint still wasn’t removed anywhere near as well as my new-found method, using Glad Wrap.
- I didn’t have to sand very much at all using this method. I just gave a gentle sand with 220 grit, and the door is beautifully smooth.
The finished item is on the right. You can see that, even though the whole process was so incredibly easier, and time efficient, the result is also much, much better. With the other door I actually damaged some of the moulding, trying to remove the built up paint. None of the better door is damaged at all. Far too easy!
Hope you find this useful! ☺
I’d like to thank Elisabeth for passing on this valuable tip and I hope you find it “share-worthy”. Please feel free to Pin and share to those who ask you how to strip paint. Here’s a pinnable pic below for you to share: